HP LaserJet Pro M521 Multifunction Printer series - Manual (Page 159)

Configure IP network settings
● Printer sharing disclaimer
● View or change network settings
● Manually configure IPv4 TCP/IP parameters from the control panel
● Rename the product on a network
● Link speed and duplex settings
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems
and not of the HP printer drivers. Go to Microsoft at www.microsoft.com .
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
1.
From the Home screen on the product control panel, touch the Network button to find the
product IP address.
2. To open the HP Embedded Web Server, enter the IP address into the address line of a Web
browser.
NOTE: You can also access the HP Embedded Web Server from the HP Device Toolbox for
Windows or the HP Utility for Mac OS X.
3. Click the Networking tab to obtain network information. You can change settings as needed.
Manually configure IPv4 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
1. From the Home screen on the product control panel, touch the Setup button.
2. Scroll to and touch the Network Setup menu.
3. Touch the TCP/IP Config menu, and then touch the Manual button.
4. Use the keypad on the touchscreen to enter the IP address, and touch the OK button. Touch the
Yes button to confirm.
5. Use the keypad on the touchscreen to enter the subnet mask, and touch the OK button. Touch the
Yes button to confirm.
6. Use the keypad on the touchscreen to enter the default gateway, and touch the OK button. Touch
the Yes button to confirm.
ENWW Configure IP network settings 145