Configure send fax settings, Set special dialing symbols and options, Set a dialing prefix – HP LaserJet Pro M521 Multifunction Printer series User Manual
Page 131

Configure send fax settings
●
Set special dialing symbols and options
●
●
●
●
Set special dialing symbols and options
You can insert pauses into a fax number that you are dialing. Pauses are often needed when dialing
internationally or connecting to an outside line.
Special symbol
Button
Description
Dialing pause
The Redial/Pause button is available on the control panel keypad for
entering a fax number. You can also touch the comma button to insert a
dialing pause.
Pause for dial tone
This character causes the product to wait for a dial tone before dialing the
remainder of the telephone number. This button is available only in
contexts where it is appropriate.
Hook flash
This character causes the product to insert a hook flash. This button is
available only in contexts where it is appropriate.
Set a dialing prefix
A dial prefix is a number or group of numbers that are automatically added to the beginning of every
fax number you enter at the control panel or from the software. The maximum number of characters for
a dial prefix is 50.
The default setting is
Off
. You might want to turn this setting on and enter a prefix if, for example, you
have to dial a number such as 9 to get a telephone line outside of your company telephone system.
While this setting is active, you can dial a fax number without the dial prefix by using manual dial.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Touch the
Fax Setup
menu.
3.
Touch the
Basic Setup
menu.
4.
Scroll to and touch the
Dial Prefix
button, and then touch the
On
button.
5.
Use the keypad to enter the prefix, and then touch the
OK
button. You can use numbers, pauses,
and dialing symbols.
ENWW
Configure send fax settings
117