HP XP P9500 Storage - Manual (Page 74)

Table 43 Parameters for the ICKDSF command (REQUEST=FCQUERY) (continued)
Description Value Parameter
Specifies the CU number of the S-VOL which you want to perform the FCQUERY
command. CU number QRYLSS
Use this parameter when REMOTE is YES.
Specifies the SSID of the CU on which you establish the FlashCopy relationship. SSID QRYSSID
Use this parameter when REMOTE is YES.
Using z/VM CP to view relationship states for Compatible FlashCopy
You can use the z/VM CP QUERY VIRTUAL FLASHCOPY command to view information about
a Compatible FlashCopy relationship.
The available parameters are shown in the following table:
Table 44 Parameters for the QUERY VIRTUAL FLASHCOPY command
Description Parameter
Displays information about all the virtual devices. If no parameter is specified, ALL is the default. ALL
Only displays information about the specified virtual device. vdev
Displays information about the virtual devices in the specified range. vdev1-vdev2
A usage example of the QUERY VIRTUAL FLASHCOPY command is shown below.
QUERY VIRTUAL FLASHCOPY
VDEVN SSID LSS UA CU SERIAL ACTIVE
MAX PPRC
0010 0132 02 00 2107 000000048151 1 50099
0020 0132 02 01 2107 000000048151 1 50099
Viewing resource information
You can check status and other details related to your pairs in the following:
•
View license information on the Replications window.
•
“Viewing consistency group information” (page 74)
Viewing consistency group information
You can check the number of consistency groups and the details and individual properties for
consistency groups.
•
View the number of consistency groups in the Summary section on the Local Replication
window.
•
View a list of consistency groups with status and number of pairs on the Consistency Groups
tab in the Local Replication window.
•
View a consistency group’s properties by clicking the CTG ID link on the Consistency Groups
tab in the Local Replication window.
Viewing a pair’s operations history
You can review the operations that have been performed on a pair using the View History window.
Procedure 1 To view pair history
1. Click Replications > View Histories in the tree.
2. In the View Histories window, select FC Z/FCSE in Copy Type.
74 Performing Compatible FlashCopy operations