beautypg.com

HP XP P9500 Storage User Manual

Page 30

background image

Table 12 Whether Fast Reverse Restore can be performed when a Compatible FlashCopy S-VOL is
used as a Cnt Ac-S Z volume

Status of Cnt Ac-S Z pair

Shared Cnt Ac-S Z pair volume

Suspend

Pending duplex

Duplex

OK*

OK*

OK*

M-VOL

Cnt Ac-S Z

No

No

No

R-VOL

*You can perform Fast Reverse Restore when you specify the following options.

TSO: TGTPPRIM(YES)

ICKDSF: TGTOKASPPRCPRIM(YES)

ANTRQST Macro: TGTPPRIM(YES)

Using a volume both as a Compatible FlashCopy T-VOL and a Cnt Ac-S Z M-VOL

Volumes may be used as both a Compatible FlashCopy T-VOL and a Cnt Ac-S Z M-VOL as
long as they are of any combination shown in

Table 20 (page 34)

.

The following table shows whether you can share the Compatible FlashCopy T-VOL and the
Cnt Ac-S Z M-VOL.

Table 13 Whether Compatible FlashCopy T-VOL can be used as Cnt Ac-S Z

Status of Cnt Ac-S Z pair

Shared Cnt Ac-S Z pair volume

Suspend

Pending duplex

Duplex

OK

OK

OK

M-VOL

Cnt Ac-S Z

The following table describes the Cnt Ac-S Z pair status that is required when performing a Reverse
Restore and Fast Reverse Restore if a Compatible FlashCopy T-VOL and the volume of a Cnt Ac-S
Z pair is shared.

Table 14 Cnt Ac-S Z status that determines whether Reverse Restore and Fast Reverse Restore can
be performed

Status of Cnt Ac-S Z pair

Shared Cnt Ac-S Z pair volume

Suspend

Pending duplex

Duplex

OK

OK

OK

M-VOL

Cnt Ac-S Z

If S-VOL and T-VOL of Compatible FlashCopy are both Thin Provisioning Z volumes, the number
of pages remaining in T-VOL may differ depending on the timing.

The procedures when you use a DFSMS,TSO, or ICKDSF command are as follows. You cannot
perform Fast Reverse Restore when you use DFSMSdss.

Using DFSMS commands to share Compatible FlashCopy and Cnt Ac-S Z volumes

Note: If the status of the Cnt Ac-S Z pair is duplex, you need to use a TSO command instead of a
DFSMS command.

To share a Compatible FlashCopy S-VOL and a Cnt Ac-S Z R-VOL:
1.

To maintain the consistency of data, terminate I/O operations to the volumes of Cnt Ac-S Z
pairs.

2.

Suspend the Cnt Ac-S Z pair. Example:

CSUSPEND DEVN(X'dev#) PRIM(X'ssid') serial# X'cca' X'lss')
SEC(X'ssid' serial# X'lss')

30

About Compatible FlashCopy operations