HP XP P9500 Storage User Manual
Page 67
Table 38 Information displayed by the FCQUERY command (continued)
Definition
Displayed content
Displayed item
Displays the Sequence Number. However, since Compatible FlashCopy does not
support this function, "00000000" will always be displayed for this item. For details
about Sequence Number, see the IBM manual.
-
SEQNUM
*In case the volume is set online in more than one LPAR defined by the mainframe system host.
Figure 31 Calculation example of the number of the pairs displayed in "ACT"
ACT shows the total number of the active Compatible FlashCopy relationships in each extent.
Therefore, in the example in the figure, the total number of the active Compatible FlashCopy
relationships in the VOL#0 and VOL#1 is both two, and the digit two (2) displays as the content
of ACT. Example of FCQUERY command with the SHOWRELS parameter:
FCQUERY DEVN(1900) SHOWRELS(ALL)
The result of the FCQUERY command with the SHOWRELS parameter is shown below. The items
above the “RELATIONSHIP DETAIL STARTING TRACK” are the same as when the SHOWRELS
parameter is not specified.
(above) describes these items.
describes items below “RELATIONSHIP DETAIL STARTING TRACK”.
Figure 32 FCQUERY command execution result
Viewing relationship states of Compatible FlashCopy
67