HP XP P9500 Storage - Manual (Page 70)

TGT CAP
CAPABILITY LEGEND
ASY PVOL = ASYCHRONOUS PPRC REMOTE COPY PRIMARY
CC SRC = CONCURENT COPY SOURCE
INACCESS = VOLUME INACCESSIBLE, DATA NOT OBTAINABLE
INHIBIT = FLASHCOPY INHIBITED O. THIS-VOLUME
MAX EXCD = MAXIMUM RELATIONS EXCEEDED AT-VOLUME OR ESS LEVEL
NEITHER = VOLUME NEITHER FC SOURCE NOR FC TARGET CAPABLE
PPRC PRI = PPRC PRIMARY
PPRC SEC = PPRC SECONDARY
PHASE 1 = PHASE 1 (VERSION 1) RELATIONSHIP EXISTS O. VOLUME
SRC CAP = FLASHCOPY SOURCE CAPABLE
TGT CAP = FLASHCOPY TARGET CAPABLE
XRC SRC = XRC SOURCE
The following table shows the information that is displayed after executing the FLASHCPY QUERY
command:
Table 41 Information displayed by the FLASHCPY QUERY command
Meaning Displayed content Displayed item
Displays the number of relationships in the specified volumes. Number of
relationships EXISTINO
RELATIONS
Displays the maximum number of relationships that can be created in the
specified volumes. Number of
relationships MAXIMUM
ALLOWED
RELATIONS
The number of relationships in the specified volume does not reach the maximum
number of relationships that can be created in the specified volume. NO MAXIMUM
RELATIONS
EXCEEDED
The maximum number of relationships that can be created in the specified
volume is already created. YES(VOL)
The maximum number of the relationships that can be created in the storage
system is already created. YES(ESS)
The specified volume can be specified as the S-VOL of the FC Z. SRC CAP CAPABILITY
The specified volume can be specified as the T-VOL of the FC Z. TGT CAP
The specified volume cannot be specified as the S-VOL or T-VOL of the FC Z. NEITHER
The specified volume is the copy source volume of Continuous Access
Synchronous Z. PPRCOPY PRI
The specified volume is the copy target volume of Continuous Access
Synchronous Z. PPRCOPY SEC
The specified volume is the copy source volume of the Concurrent Copy. CC SRC
The specified volume cannot be used by FC Z. INHIBIT
The maximum number of relationships that can be created in the specified
volume is already created. MAX EXCD
A Version 1 relationship exists in the specified volume. PHASE 1
Cannot access the specified volume. INACCESS
The previous example displays the description of "ASY PVOL" in the "CAPABILITY LEGEND", but
P9500 does not support the program product corresponding to this item. Therefore, even if the
FLASHCPY QUERY
command is executed on the Compatible FlashCopy pair, the "ASY PVOL"
will not be displayed in the "CAPABILITY".
70 Performing Compatible FlashCopy operations