HP XP P9500 Storage - Manual (Page 114)

3. Serious
4. Acute
The larger the number becomes, the more the message becomes important. The SVP reports all
SIMs related to Compatible FlashCopy operations. All SIMs are stored on the SVP for use by HP
personnel. The SIMs reported to the zSeries and S/390 host are logged in the SYS1.LOGREC
dataset of the host operating system. Each time a SIM is generated, the amber Message LED on
the control panel (under the Ready and Alarm LEDs) turns on as an additional alert for the user.
The Remote Web Console computer also displays the SIMs to provide an additional source of
notification for the user.
For further information on SIM reporting, please contact your HP representative or the HP Support
Center.
The following figure shows a typical 32-byte SIM from the storage system.
Figure 42 Typical SIM showing reference code and SIM type
SIMs are displayed on the host console by reference code (RC) and severity. The six-digit RC
(composed of bytes 22, 23, and 13) identifies the possible error and determines the severity. The
SIM type (byte 28) indicates the component that experienced the error.
The following table shows the DKC SIM (byte 28 = F1) related to BC Z operations:
Table 66 SIM
Descriptions Importance level Reference Code
SSB23 SSB22
Copying process of FC Z ends abnormally. Internally the relationship becomes
suspended by failure and the T-VOL becomes inaccessible. Moderate 2x 4B
•
"x" indicates the last digit of the T-VOL's CU number (0x0 to 0xF).
• "SSB13" indicates the T-VOL's LDEV number.
The FC Z relationship is automatically withdrawn and the T-VOL becomes
inaccessible because the power supply was turned on while the shared memory
volatilized. Moderate E5 47
114 Troubleshooting