HP XP P9500 Storage User Manual
Page 72
Table 42 Information displayed by the FLASHCPY QUERY RELATIONS command (continued)
Meaning
Displayed content
Displayed item
The updated part is not managed as a differential data when the S-VOL
and the T-VOL are updated.
F
It is verified whether the displayed information is the latest or not.
T
VR
It is not verified whether the displayed information is the latest or not.
F
The writing to the S-VOL is not allowed.
T
SWI
The writing to the S-VOL is allowed.
F
The writing to the T-VOL is not allowed.
T
TWP
The writing to the T-VOL is allowed.
F
The consistency of the extent is maintained.
T
P
The consistency of the extent is not maintained.
F
Displays the starting CCHH of the extent of the copy source.
CCHH number
START OF
EXTENT(SOURCE)
Displays the starting CCHH of the extent of the copy target.
CCHH number
START OF
EXTENT(TARGET)
Displays the number of tracks in the relationship.
Number of tracks
# CONTIG TRKS IN
EXTENT
Displays the number of tracks that are not finished copying in the
relationship.
Number of tracks
# TRACKS YET TO BE
COPIED
Displays the SSID (storage subsystem ID) of the storage system where the
relationship belongs.
Storage
subsystem ID
SSID
Displays the CU number of the volume where the relationship exists.
CU number
LSS
Displays the device number of the storage system where the relationship
exists.
Device number
CCA
This volume is a TSE-VOL.
T
S
This volume is a normal volume.
F
When the command is issued to the S-VOL, the T-VOL is a TSE-VOL.
T
E
When the command is issued to the S-VOL, the T-VOL is a normal volume.
If the command is issued to the T-VOL, the T-VOL is a normal volume or a
TSE-VOL.
F
When a pool of the T-VOL becomes full, the relationship will be in FAILED
State.
T
V
When a pool of the T-VOL becomes full, the relationship will not be in
FAILED State.
F
The relationship is in Failed State.
T
I
The relationship is in Normal State.
F
The relationship is established without using the Preserve Mirror FlashCopy
function.
N
PM
The relationship is established by specifying "Preferred" in the Preserve
Mirror FlashCopy function.
P
The relationship is established by specifying "Required" in the Preserve
Mirror FlashCopy function.
R
72
Performing Compatible FlashCopy operations