HP LaserJet P4015 Printer series - Manual (Page 97)

Configure trays
The product automatically prompts you to configure a tray for type and size in the following situations:
● When you load paper into the tray
● When you specify a particular tray or paper type for a print job through the printer driver or a software
program and the tray is not configured to match the print-job’s settings
NOTE: The prompt does not appear if you are printing from Tray 1 and Tray 1 is configured for ANY
SIZE and ANY TYPE.
NOTE: If you have used other HP LaserJet product models, you might be accustomed to configuring
Tray 1 to First mode or Cassette mode. On this product, setting Tray 1 size to ANY SIZE is equivalent
to First mode. Setting Tray 1 size to a setting other than ANY SIZE is equivalent to Cassette mode.
Configure a tray when loading paper
1. Load paper in the tray. Close the tray if you are using a tray other than Tray 1.
2. The tray configuration message appears.
3. Press OK to accept the detected size.
-or-
Press the back arrow to choose a different configuration, and continue with the following steps.
4. To modify the tray configuration, press the down arrow to highlight the correct size, and then
press
OK .
NOTE: The product automatically detects most paper sizes in trays other than Tray 1.
5. Press the down arrow to highlight the correct type, and then press OK .
Configure a tray to match print job settings
1. In the software program, specify the source tray, the paper size, and the paper type.
2. Send the job to the product.
If the tray needs to be configured, a prompt appears on the control-panel display.
3. If the displayed size is not correct, press the back arrow . Press the down arrow to highlight
the correct size, or highlight CUSTOM.
To specify a custom size, first press the down arrow to highlight the correct unit of measure.
Then set the X and Y dimensions by using the numeric keypad or by pressing the up arrow or
the down arrow .
4. If the displayed paper type is not correct, press the back arrow , and then press the down arrow
to highlight the paper type.
ENWW Configure trays 85