HP LaserJet P4015 Printer series - Manual (Page 164)

Control panel message Description Recommended action
alternates with
DATE/TIME=YYYY/MMMM/DD HH:MM
Press OK to continue
To skip press .
The current date and time. Set the date and time or press the stop button
to skip.
Deleting... Product is deleting a stored job. No action is necessary.
DUPLEXER ERROR REMOVE DUPLEXER
Install duplexer with power off
The optional duplexer has an error. Turn off the product and reattach the optional
duplexer. (Any print jobs at the product might
be lost.)
EIO DISK NOT FUNCTIONAL
For help press
The EIO disk in slot X is not working correctly. 1. Turn the product off.
2. Make sure the EIO disk is inserted
correctly and securely fastened.
3. If the control panel message continues
to appear, the optional hard disk needs
to be replaced.
EIO DISK SPINNING UP
alternates with
The disk accessory in EIO slot [X] is
initializing. No action is necessary.
EIO DEVICE FAILURE
To clear press OK
The specified device has failed. Press OK to continue.
EIO FILE OPERATION FAILED
To clear press OK
A command attempted an illogical operation. Press OK to continue.
EIO FILE SYSTEM IS FULL
To clear press OK
The specified file system is full and cannot be
written to. Press OK to continue.
EIO IS WRITE PROTECTED
To clear press OK
The file system cannot be written to. Press OK to continue.
Envelope Feeder [Type] [Size]
To change size or type press OK
alternates with
TRAY [TYPE] [SIZE]
For help press
Current size and type of tray. To accept the size and type, press the back
arrow
.
To change settings, press OK .
ENVELOPE FEEDER EMPTY
alternates with
The envelope feeder is empty. Load envelopes in the envelope feeder.
Event log empty You are attempting to view an empty event
log by selecting SHOW EVENT LOG from the
control panel. No action is necessary.
Table 10-1 Control-panel messages (continued)
152 Chapter 10 Solve problems ENWW