Economy settings, Economode, Sleep delay – HP LaserJet P4015 Printer series User Manual
Page 102: Set sleep delay, Disable or enable sleep mode, Economode sleep delay
Economy settings
EconoMode
This product has an EconoMode option for printing drafts of documents. Using EconoMode can use
less toner and decrease the cost per page. However, using EconoMode can also reduce print quality.
HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, the toner supply
might outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these
circumstances, you will need to install a new print cartridge, even if there is toner supply remaining in
the cartridge.
Enable or disable EconoMode in any of these ways:
●
At the product control panel, select the CONFIGURE DEVICE menu, and then select the PRINT
QUALITY submenu. EconoMode is turned off by default.
●
In the embedded Web server, open the Settings tab and select the Configure Device option.
Navigate to the Print Quality submenu.
●
In the HP Printer Utility for Macintosh, click Configuration Settings, and then click Economode
& Toner Density.
●
In the Windows PCL printer driver, open the Paper/Quality tab, and select the EconoMode option.
Sleep delay
The adjustable sleep mode feature reduces power consumption when the product has been inactive for
an extended period. You can set the length of time before the product enters sleep mode to one of
several settings.
NOTE:
The product display dims when the product is in sleep mode. This mode does not affect product
warm-up time.
Set sleep delay
1.
Press
Menu
.
2.
Press the down arrow to highlight CONFIGURE DEVICE, and then press
OK
.
3.
Press the down arrow to highlight SYSTEM SETUP, and then press
OK
.
4.
Press the down arrow to highlight SLEEP DELAY, and then press
OK
.
5.
Use the numeric keypad, or press the up arrow or the down arrow to select the appropriate
time period, and press
OK
.
6.
Press
Menu
.
Disable or enable sleep mode
1.
Press
Menu
.
2.
Press the down arrow to highlight CONFIGURE DEVICE, and then press
OK
.
3.
Press the down arrow to highlight RESETS, and then press
OK
.
90
Chapter 7 Use product features
ENWW