HP LaserJet P4015 Printer series User Manual
Page 78
Manually configure IPv6 TCP/IP parameters from the control panel
In addition to using the embedded Web server, you can also use the control-panel menus to set an IPv6
address.
1.
Press
Menu
.
2.
Press the down arrow to highlight CONFIGURE DEVICE, and then press
OK
.
3.
Press the down arrow to highlight I/O, and then press
OK
.
4.
Press the down arrow to highlight EMBEDDED JETDIRECT MENU, and then press
OK
.
5.
Press the down arrow to highlight TCP/IP, and then press
OK
.
6.
Press the down arrow to highlight IPV6 SETTINGS, and then press
OK
.
7.
Press the down arrow to highlight ADDRESS, and then press
OK
.
8.
Press the down arrow to highlight MANUAL SETTINGS, and then press
OK
.
9.
Press the down arrow to highlight ENABLE, and then press
OK
.
10.
Press the down arrow to highlight ADDRESS, and then press
OK
.
11.
Use the numeric keypad, or press the up arrow or the down arrow to enter the address. Press
OK
.
NOTE:
If you are using the arrow buttons, you must press
OK
after entering each digit.
12.
Press
Menu
to return to the Ready state.
66
Chapter 5 Connectivity
ENWW