HP LaserJet P4015 Printer series - Manual (Page 163)

Control panel message Description Recommended action
BAD OPTIONAL TRAY CONNECTION An optional tray is not connected correctly. Remove the product from the tray, and
reinstall it. Then, turn the product off and then
on.
Canceling... The product is canceling a job. The message
continues while the job is stopped, the paper
path is cleared, and any remaining incoming
data on the active data channel is received
and discarded. No action is necessary.
CANNOT DUPLEX CLOSE REAR DOOR
For help press
The rear door must be closed to duplex. Close the rear door.
Checking paper path The product is checking for possible jams or
paper that was not cleared from the product. No action is necessary.
Checking printer The product is checking for possible jams or
paper that was not cleared from the product. No action is necessary.
CHOSEN PERSONALITY NOT
AVAILABLE
To continue press OK
The product received a request for a
personality (product language) that does not
exist. The print job is canceled. Print the job using a printer driver for a
different product language, or add the
requested language to the product (if
available).
To see a list of available personalities, print a
configuration page.
CLEANING DISK % COMPLETE
Do not power off
alternates with
CLEANING DISK % COMPLETE
For help press
The storage device is being sanitized or
cleaned. Do not turn off. Product functions
are unavailable. The product automatically
turns off then on when finished. No action is necessary.
CLEANING PAGE ERROR
Open rear bin
You have attempted to create or process a
cleaning page when a duplexer is present
and the rear door is closed. Open the rear output bin to begin creating or
processing the cleaning page.
Cleaning... The product is performing an automatic
cleaning. Not action is necessary.
Clearing event log The product is clearing the event log. No action is necessary.
Clearing paper path The product jammed or was turned on and
paper was detected in a wrong location. The
product is automatically attempting to eject
the pages. Wait for the product to finish trying to clear the
pages. If it cannot, a jam message will appear
on the control panel display.
CODE CRC ERROR SEND FULL RFU ON
PORT An error occurred during a firmware upgrade. Contact an HP-authorized service or support
provider.
CORRUPT FIRMWARE IN EXTERNAL
ACCESSORY
For help press
The product detected corrupt firmware in an
input or output accessory. Printing can continue, but jams might occur.
To view instructions for upgrading the
firmware and to download the firmware
upgrade, see
Upgrade the firmware
on page 134 .
DATA RECEIVED
To print last page press OK
The product is waiting for the command to
print (such as waiting for a form feed, or when
the print job is paused). Press OK to continue.
Table 10-1 Control-panel messages (continued)
ENWW Interpret control-panel messages 151