Disable network protocols (optional), Disable ipx/spx, appletalk, or dlc/llc – HP LaserJet P4015 Printer series User Manual
Page 79
Disable network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols has the
following benefits:
●
Decreases product-generated network traffic
●
Prevents unauthorized users from printing to the product
●
Provides only pertinent information on the configuration page
●
Allows the product control panel to display protocol-specific error and warning messages
Disable IPX/SPX, AppleTalk, or DLC/LLC
NOTE:
Do not disable IPX/SPX in Windows-based systems that print through IPX/SPX.
1.
Press
Menu
.
2.
Press the down arrow to highlight CONFIGURE DEVICE, and then press
OK
.
3.
Press the down arrow to highlight I/O, and then press
OK
.
4.
Press the down arrow to highlight EMBEDDED JETDIRECT, and then press
OK
.
5.
Press the down arrow to highlight IPX/SPX, and then press
OK
.
-or-
Press the down arrow to highlight APPLETALK, and then press
OK
.
-or-
Press the down arrow to highlight DLC/LLC, and then press
OK
.
6.
Press
OK
to select ENABLE.
7.
Press the down arrow to highlight OFF, and then press
OK
.
8.
Press
Menu
to return to the Ready state.
ENWW
Network configuration
67