HP LaserJet P4015 Printer series - Manual (Page 125)

Use security features
The product supports security standards and recommended protocols that help you keep the product
secure, protect critical information on your network, and simplify the way you monitor and maintain the
product.
For in-depth information about HP's secure imaging and printing solutions, visit www.hp.com/go/
secureprinting . The site provides links to white papers and FAQ documents about security features.
IP Security
IP Security (IPsec) is a set of protocols that control IP-based network traffic to and from the product.
IPsec provides host-to-host authentication, data integrity, and encryption of network communications.
For products that are connected to the network and have an HP Jetdirect print server, you can configure
IPsec by using the Networking tab in the embedded Web server.
Secure the embedded Web server
You can configure the embedded Web server so that access to the Settings and Networking tabs
requires a password.
1. Open the embedded Web server by entering the product IP address into the address line of a Web
browser.
2. Select the Settings tab, and then select Security from the menu on the left side of the screen.
3. In the Device Password area, type the new password in the boxes labeled New Password and
Verify Password. If you have already set up a password, type the old password in the Old
Password box.
4. Click Apply.
Secure stored jobs
You can protect jobs that are stored on the product by assigning a PIN to them. Anyone who tries to
print these protected jobs must first enter the PIN at the product control panel.
For more information, see Use job storage features on page 93 .
ENWW Use security features 113