HP LaserJet P4015 Printer series - Manual (Page 39)

Item Values Explanation
4 HOURS The product automatically comes out of Sleep mode when you
send a print job, press a product control-panel button, open a
tray, or open the top cover.
The default setting is 30 MINUTES.
WAKE TIME MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
Sets a “wake-up” time for the product to warm up each day.
The default for each day is OFF. If you set a wake time, HP
recommends setting an extended sleep delay time period, so
that the product will not return to sleep mode soon after waking.
DISPLAY BRIGHTNESS A value from 1 to 10 Controls the brightness of the control panel display. The
default is 5.
PERSONALITY AUTO
PS
PDF
PCL SUBMENU
Selects the default product language (personality). The
possible values are determined by which valid languages are
installed in the product.
Normally, you should not change the product language. If you
change it to a specific product language, the product will not
switch automatically from one language to another unless
specific software commands are sent to the product.
The default setting is AUTO.
CLEARABLE WARNINGS JOB
ON
Sets the amount of time that a clearable warning appears on
the product control-panel display.
JOB: The clearable warning message appears until the end of
the job that generated the message.
ON: The clearable warning message appears until you press
OK .
The default setting is JOB.
AUTO CONTINUE OFF
ON
Determines how the product reacts to errors. If the product is
on a network, you probably want to turn AUTO CONTINUE to
ON.
ON: If an error occurs that prevents printing, the message
appears on the product control-panel display, and the product
goes offline for 10 seconds before returning online.
OFF: If an error occurs that prevents printing, the message
remains on the product control-panel display, and the product
remains offline until you press
OK .
The default setting is ON.
REPLACE BLACK
CARTRIDGE STOP AT LOW
STOP AT OUT
OVERRIDE AT OUT
Determines how the product behaves when the print cartridge
is low or out.
STOP AT LOW: The product stops printing when the print
cartridge reaches the low threshold. Press
OK to continue
printing.
ENWW Configure Device menu 27