HP OneView for VMware vCenter - Manual (Page 68)

•
LUN Number—LUN used for presenting the storage disk from the storage system port to the
host HBA port
•
Path ID—Path ID assigned by VMware
•
Preferred Path
HP StoreVirtual—Not applicable ◦
◦ HP 3PAR StoreServ—Not applicable
◦ HP EVA—Specifies whether the path uses a port on the controller that is configured as
the preferred path for the vdisk (Yes, No, No preference)
◦ HP MSA 2000 G2/HP MSA P2000 G3—Not applicable
◦ HP XP P9000/HP XP—Not applicable
◦ HP StoreOnce Backup—Not applicable
•
Active Path—Specifies whether the path is active or in standby status
Viewing HP Infrastructure
NOTE: The HP Infrastructure feature is available on the vSphere Web Client only.
The Storage Module for vCenter provides an inventory list that can be displayed to view more
information on the configured storage systems. To view the storage systems on the HP Infrastructure
page, they must first be configured using the Storage Administrator Portal. For more information,
see
“Configuring the Storage Module for vCenter” (page 11) .
TIP: After configuring the storage systems, initiate cache refresh and make sure the refresh action
is finished before opening the HP Infrastructure page.
To access the HP Infrastructure page, on the vSphere Web Client home page click on the HP
Infrastructure link in the left navigation pane or click the HP Infrastructure icon under Inventories.
The HP Infrastructure page is displayed. See
Figure 16 (page 68) .
Figure 16 HP Infrastructure page
68 Using Insight Control for vCenter