HP OneView for VMware vCenter - Manual (Page 11)

3. Enter the iLO IP address or host name, and a user name and password.
Onboard Administrator Single Sign-On
To enable SSO, you must upload the Insight Control for vCenter certificate to the Onboard
Administrator.
1.
On the Onboard Administrator, navigate to Users/Authentication
→HP SIM Integration.
2. Set the trust mode to Trust by Certificate.
3. Locate and copy the certificate using one of the following methods:
•
In the vSphere Client, access the HP Home Settings page. See “Configuring the Server
Module for vCenter” (page 9) .
Click the Certificate Administration tab. Copy the text from the Self Signed Certificate text
box.
•
Access the certificate in the following file:
install location\uim\server.pem
Open this file with a text editor, such as Notepad, and then copy the text.
4. Click the Onboard Administrator SIM Integration Certificate Upload tab, and then paste the
contents of the Insight Control for vCenter certificate into the box.
Accessing management tools
Depending on the software installed, links will be available for the following:
•
HP SIM (SIM)
•
Onboard Administrator (OA)
•
iLO Remote Management (iLO)
•
HP Insight Control power management (IPM)
•
Virtual Connect Manager (VC)
•
Virtual Connect Enterprise Manager (VCEM)
Access is determined by enabled communication credentials set in the Host Properties page or the
Server Password Management page and user/group vCenter role. For more information, see
“Configuring the Server Module for vCenter” (page 9) and “Role-based security” (page 9) .
Configuring the Storage Module for vCenter
After the Storage Module for vCenter is installed, use the Storage Administrator Portal to configure
the storage systems and management servers. If you want to configure the HP VASA feature (ESXi
5.0 and later), configure the storage systems and management servers, and then complete the
procedure
“Configuring the VMware VASA provider” (page 21) .
For information about the Storage Administrator Portal, see “About the Storage Administrator
Portal” (page 11) .
For configuration instructions, see “Configuring storage systems and management servers” (page 12)
and “Configuring the VMware VASA provider” (page 21) .
About the Storage Administrator Portal
The Storage Administrator Portal for VMware vCenter enables you to configure storage systems
and management servers for management by the Storage Module for vCenter.
For storage systems that support provisioning, use the Storage Administrator Portal to assign access
permissions to storage pools. You can use the vSphere Client to perform storage provisioning
operations such as adding a new datastore, deleting or expanding an existing datastore, creating
Configuring the Storage Module for vCenter 11