HP OneView for VMware vCenter - Manual (Page 54)

•
HP Storage ThP Savings—Amount of storage saved through the use of array-based thin
provisioning
•
Volumes overprovisioned—Number of over-provisioned volumes
Provisioned from Cluster to Virtual Machines
•
Current storage inventory—Number of datastores, RDMs, and unused volumes provisioned
to VMs
•
Cluster Provisioned Capacity—Total amount of storage available to the cluster, including HP
storage, local storage, and unmanaged disks
•
Cluster Used Capacity—Amount of storage used by the cluster
•
Cluster Available Capacity—Amount of unused storage available to the cluster
•
Datastores overprovisioned—The number of over-provisioned datastores
•
VMDK/RDM Provisioned—Amount of storage provisioned by the cluster as virtual disks (VMDKs
or RDMs)
•
VMDK/RDM Used—Amount of storage used by the cluster as virtual disks (VMDKs or RDMs)
HP Storage Arrays
This section lists the arrays that present disks to the selected cluster. For each array, move the cursor
over the status bar to view storage information.
The following information is displayed for each array:
•
Volumes—Number of volumes presented to the selected cluster from the array
•
Used—Amount of storage used by the cluster from the array.
•
Total—Total amount of storage presented to the selected cluster from the array
•
% Savings—Amount of storage saved through the use of array-based thin provisioning
•
Free pool capacity—Amount of available storage in the selected array. The number reflects
the difference between configured storage and used storage.
◦ HP StoreVirtual—Amount of available storage in HP StoreVirtual array storage pools
provisioned to this cluster
◦ HP 3PAR StoreServ—Storage available in HP 3PAR StoreServ common provisioning group
◦ HP EVA—Amount of available storage in HP EVA storage pools provisioned to this cluster
◦ HP XP or HP XP P9000—Amount of available storage in the HP XP P9000 or HP XP thin
provisioning storage pool for HP XP P9000 or HP XP array storage that is provisioned to
this cluster
◦ HP StoreOnce Backup—Deduplication Ratio
Available HP StoreOnce Backup Systems
This section lists the HP StoreOnce Backup Systems available. For each HP StoreOnce Backup
System, move the cursor over the status bar to view storage information.
For each configured backup system, all the service sets are displayed. For each service set the
following information is displayed:
•
Used—The amount of data stored on the service set by the services on the service set.
•
Total—Total amount of storage on the service set.
•
Deduplication Ratio—The deduplication ratio of data stored on the service set.
Datastores
54 Using Insight Control for vCenter