HP OneView for VMware vCenter - Manual (Page 52)

NOTE: The HP Storage Used value can differ from the HP Storage Provisioned value if thin
provisioning or demand-allocated snapshots are used.
•
HP Storage ThP Savings—Amount of storage saved through the use of thin provisioning
•
Volumes overprovisioned—Number of over-provisioned volumes
Provisioned from Host to Virtual Machines
•
Current storage inventory—Number of datastores, RDMs, and unused volumes provisioned
to VMs
•
Host Provisioned Capacity—Total amount of storage available to the host, including HP storage,
local storage, and unmanaged disks
•
Host Used Capacity—Amount of storage used by the host
•
Host Available Capacity—Amount of unused storage on the host
•
Datastores overprovisioned—The number of over-provisioned datastores
HP Storage Arrays
This section lists the arrays that present disks to the selected host. For each array, move the cursor
over the status bar to view storage information.
The following information is displayed for each array:
HP Storage Provisioned to Host
•
Volumes—Number of volumes presented to the selected host from the array
•
Used—Amount of storage used by the host from the array
•
Total—Total amount of storage presented to the selected host from the array
•
Free pool capacity—Amount of available storage in the selected array. The number reflects
the difference between configured storage and used storage.
◦ HP XP P9000 or HP XP—Amount of available storage in the P9000 or XP thin provisioning
storage pool for P9000 or XP array storage that is provisioned to this cluster
◦ HP EVA or HP StoreVirtual—Amount of available storage in HP EVA and HP StoreVirtual
array storage pools provisioned to this cluster
•
% Savings—Amount of storage saved through the use of array-based thin provisioning
Storage Pool
•
Total pool size—Total size of the storage pool
•
Provisioned used on pool—Amount of provisioned space used on the storage pool
•
Provisioned free on pool—Amount of provisioned space free on the storage pool
•
Unallocated space on pool—Amount of space not provisioned or allocated on the storage
pool
Available HP StoreOnce Backup Systems
This section lists the HP StoreOnce Backup Systems available. For each HP StoreOnce Backup
System, move the cursor over the status bar to view storage information.
For each configured backup system, all the service sets are displayed. For each service set the
following information is displayed:
•
Used—The amount of data stored on the service set by the services on the service set.
•
Total—Total amount of storage on the service set.
•
Deduplication Ratio—The deduplication ratio of data stored on the service set.
52 Using Insight Control for vCenter