HP ProLiant DL760 G2 Server - Manual (Page 65)

Installing the Server in a Rack
5. Reverse and secure the back of the template to the vertical rack columns at the
rear of the rack by pressing the two push tabs through the matching holes. Use a
pencil or marker to mark the locations on the rack where the cable management
arm (A) and slide bracket (S) must be installed.
Figure 2-10: Marking the back of the rack
6. Remove the template.
7. Transfer the (S) marks to the inside of the vertical rack columns so they are
visible from the front of the rack.
HP ProLiant DL760 Generation 2 Server User Guide 2-21
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 9:22 AM