HP ProLiant DL760 G2 Server - Manual (Page 130)

Installing Hardware Options, Hot-Pluggable
• SCO UnixWare 7.1.3
• Red Hat Linux 7.2
• SuSE Linux Enterprise Server 7
Hot-Replacing Memory
If there is a problem with a DIMM in your server, the DIMM status LEDs will
illuminate either solid or blinking. If the DIMM status LED for a specific DIMM in a
specific cartridge is solid, then the DIMM needs to be replaced.
CAUTION: A redundant memory configuration is required when performing Hot Plug
RAID Memory functions.
• If all five memory cartridges are online and error free, any memory cartridge can
be removed.
• If one of the five memory cartridges requires attention, only that memory
cartridge can be removed.
• If two or more memory cartridges require attention and are online (cartridge
power LED is illuminated), no cartridge can be removed while the system is
online. An audible alarm will sound if any cartridge is unlocked.
IMPORTANT: You cannot perform a hot-replace of memory if only four memory cartridges are
installed. The system must have a redundant memory configuration (five cartridges online and
error free) before the hot-replace feature will function.
HP ProLiant DL760 Generation 2 Server User Guide 5-15
HP CONFIDENTIAL
Writer: Bryce Miller File Name: f-ch5 Installing Options-Hot Pluggable.doc
Codename: Comet Part Number: 201264-001 Last Saved On: 6/17/03 9:47 AM