HP ProLiant DL760 G2 Server - Manual (Page 219)

Configuring the Server
8-26 HP ProLiant DL760 Generation 2 Server User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: i-ch8 Configuring the Server.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:10 AM
4. Reboot the server from the SmartStart CD.
5. Follow the screen prompts.
6. Install Insight Manager 7 when prompted by SmartStart.
When the CD-ROM busy LED is lit, the SmartStart installation sequence begins.
NOTE: Refer to the ProLiant Essentials Foundation Pack for instructions about using
SmartStart.
NOTE: To manage the system, refer to the Management CD provided in the ProLiant
Essentials Foundation Pack that was shipped with your server.
Installing HP Drivers and Utilities
After successfully installing and configuring the operating system, you need to install
software drivers and utilities that are specific to HP and the installed operating
system. HP has made every effort to get the primary drivers included in the supported
operating system. In addition, HP provides value-add software drivers, agents, and
utilities included in the ProLiant Essentials Foundation Pack. The ProLiant Essentials
Foundation Pack contains the SmartStart CD and the Management CD.
The procedure for installing this software varies, depending on the installed operating
system. Refer to the documentation included on each CD for details.