Accessing the system maintenance menu, Accessing the system maintenance menu -6 – HP ProLiant DL760 G2 Server User Manual

Page 199

Text mode
Original mode

Configuring the Server

Accessing the System Maintenance Menu

The System Maintenance Menu is embedded into the system ROM and replaces the
legacy System Partition functionality that was supported on previous ProLiant
servers. SMM can be run by pressing the F10 key at the end of system boot, just
before the operating system is loaded from the hard disk, as shown in Figure 8-5 and
Figure 8-6.

Figure 8-5: System prompts after a POST error

8-6

HP ProLiant DL760 Generation 2 Server User Guide

HP CONFIDENTIAL

Writer: Jennifer Hayward File Name: i-ch8 Configuring the Server.doc

Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:10 AM