HP ProLiant DL760 G2 Server - Manual (Page 49)

Installing the Server in a Rack
• If a power strip is used, the load should not exceed 80 percent of the marked
electrical current rating of the power strip.
NOTE: For server specifications, refer to Appendix F.
The installation of this equipment must be in accordance with local or regional
electrical regulations governing the installation of Information Technology
Equipment by licensed electricians. This equipment is designed to operate in
installations covered by the National Electric Code (ANSI/NFPA 70, 1999) and the
code for Protection of Electronic Computer/Data Processing Equipment
(ANSI/NFPA 75, 1992).
For electrical power ratings of options, refer to the rating label on the product or to
the user documentation supplied with those options.
IMPORTANT: Most system configurations require 200-240 VAC. Use 200-240 VAC line cords
to power the server.
HP ProLiant DL760 Generation 2 Server User Guide 2-5
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 9:22 AM