HP ProLiant DL760 G2 Server - Manual (Page 116)

5
Installing Hardware Options, Hot-Pluggable
The following instructions are provided as an overview for installing hardware option
upgrades that are hot-pluggable. HP recommends that you use the documentation
provided with the hardware option for complete installation instructions. You can
also refer to the HP ProLiant DL760 Generation 2 Server Setup Poster included in
the shipping box or to the labels attached to the I/O lid of the server.
WARNING: To reduce the risk of personal injury or damage to the equipment,
heed all warnings and cautions throughout the installation instructions.
WARNING: To reduce the risk of personal injury or damage to the equipment,
the installation of options other than hot-plug power supplies and hot-plug
hard drives should be performed only by individuals who are qualified in
servicing computer equipment and are trained to deal with products capable of
producing hazardous energy levels.
WARNING: To reduce the risk of personal injury from hazardous energy or
damage to the equipment when working on energized servers:
• Remove all watches, rings, and any other loose-fitting jewelry.
• Avoid the use of conductive tools that could bridge live parts.
CAUTION: Electrostatic discharge can damage electronic components. Be sure that
you are properly grounded before beginning any installation procedure. Refer to
Appendix B for more information.
HP ProLiant DL760 Generation 2 Server User Guide 5-1
HP CONFIDENTIAL
Writer: Bryce Miller File Name: f-ch5 Installing Options-Hot Pluggable.doc
Codename: Comet Part Number: 201264-001 Last Saved On: 6/17/03 9:47 AM