HP ProLiant DL760 G2 Server - Manual (Page 222)

Software Management
To run the RBSU:
1. Boot the computer and at the prompt press the F9 key.
2. Select Server Asset & IMD Text and press the Enter key.
3. Scroll down to select the area of IMD text you would like to change and press the
Enter key.
Figure 9-1: IMD setup using RBSU
4. Highlight the field to be modified. You must press the Enter key to edit the
highlighted item, and then type the text for that field. After entering the text,
press the Enter key to accept the modifications. Each field is discussed in detail
in the “Customizing Management Display Fields” section in this chapter.
5. Repeat steps 3 and 4 for each menu item to be modified.
6. Press the Esc key to close the Server Asset & IMD Text menu and return to the
RBSU main menu.
7. Press the Esc key to exit RBSU.
HP ProLiant DL760 Generation 2 Server User Guide 9-3
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: j-ch9 Software Management.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:14 AM