HP ProLiant DL760 G2 Server - Manual (Page 62)

Installing the Server in a Rack
WARNING: Reduce the risk of personal injury or damage to the equipment by
ensuring that the rack leveling feet extend to the floor and support the full
weight of the rack. Each rack must be level and stable. Racks that are not
coupled require stabilizers. This must be done before you perform any work on
the rack.
Refer to the Rack Planning and Installation Guide on the Documentation CD
that accompanies the Compaq branded rack for more information on leveling
feet and stabilizers.
IMPORTANT: Determine where in the rack to place the server before you start installing the
rack rail assemblies. To remind you of the proper placement of the server in the rack, refer to
the Rack Builder report you printed when you planned your rack configuration with the Rack
Builder tools provided with the Compaq branded rack.
2-18 HP ProLiant DL760 Generation 2 Server User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 9:22 AM