HP ProLiant DL760 G2 Server - Manual (Page 53)

Installing the Server in a Rack
Shipping Box Contents
Unpack the shipping boxes by following the instructions and illustrations printed on
the outside of the boxes. The shipping boxes contain the following materials:
• ProLiant DL760 G2 server
• Power cords (located inside the country kit box with the documentation box)
NOTE: A 110 VAC power cord is not included. Low line power is not supported by the
server.
• Hardware documentation and software packs (inside the country kit box),
including the ProLiant Essentials Foundation Pack, Reference Information, and
Software Products
In addition to these supplied items, you may need the following unsupplied items to
complete the installation:
• Options to be installed, such as expansion boards, monitors, an uninterruptible
power supply (UPS), hard drives, tape drives, processor boards, or additional
memory
• Hardware kit, containing rack rails and the cable management arm
• Application software
Removing the Shipping Safeguards
Refer to the following sections on removing the shipping brackets and screws
installed to protect the server from damage during shipping.
CAUTION: To prevent damage to the server, the shipping brackets and shipping
screws must be installed before shipping.
HP ProLiant DL760 Generation 2 Server User Guide 2-9
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 9:22 AM