HP ProLiant DL760 G2 Server - Manual (Page 265)

LED Indicators and Switches
A description and slot status for the PCI Hot Plug LEDs and button as shown in
Figure D-11 are provided in Table D-2.
Table D-2: PCI Hot Plug LEDs and Button
Amber LED OK to
Open
Slot Condition and Status
Off Slot does not require attention.
1 On Slot requires attention. There may be a problem with the
slot, the PCI board, or the driver. Check the green LED
before opening the slot.
Refer to the IML or the PCI Hot Plug software application
for a description of the problem indicated.
Green LED OK to
Open
Slot Condition and Status
On No Power is applied to the slot.
Blinking No Power to the slot is being turned off or on. This process
may take several minutes. Do not open the slot release
lever until the green LED is completely off.
2
Off Yes You can replace or remove the board in this slot only.
3
PCI Hot Plug
Button Each PCI Hot Plug button is used to activate or deactivate its associated
PCI Hot Plug slot. Activating or deactivating a PCI Hot Plug slot can also
be accomplished through the operating system PCI Hot Plug software
application. For more information about the PCI Hot Plug software
application, refer to the “PCI Hot Plug Operating System Support”
section in Chapter 5.
D-12 HP ProLiant DL760 Generation 2 Server User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: n-appd LED Indicators and Switches.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:43 AM