HP Tape Library Interface Manager Software - Manual (Page 89)

Chapter 4 SAN Environments 89
Ch
apter 4
d. Make a list of all the monitors and monitoring requests that have
SCSI_tape listed. (You modify these in the next step.)
e. Delete all monitoring requested for “SCSI_tape”. Use the [modify]
command:
— Type [M]. The tool displays a list of all monitoring requests and prompts
for a number of the request to change.
— Type the number of the request to modify. The tool displays a list of all
the monitors for that request and prompts for the monitor(s) to modify.
— Enter the numbers of the monitors except the one listing SCSI_tape
(usually number 12).
— Re-enter the Criteria Threshold, Criteria Operator, Notification Method,
User comment, and Client Configuration File.
Table 9 Monitors typically clumped with “SCSI_tape”
AutoRAID ses_enclosure
Default SCSI_tape
FC_adaptor FC60
TL_adaptor FW_SCSI
core_hw High_Availability
FC_hub lpmc
FC_SCSI_mux scsi123_em
FC_switch system_status
Table 10 Monitoring Requests
Send events generated by monitors
with severity >= INFORMATION to TEXTLOG /var/opt/resmon/log/event.log
Send events generated by monitors
with severity >= MAJOR WARNING to SYSLOG
Send events generated by monitors
with severity >= MAJOR WARNING to EMAIL root