HP Tape Library Interface Manager Software - Manual (Page 19)

Chapter 1 Introduction 19
Chapter 1
Specifications
Physical Specifications of the Interface Manager (IM)
The IM is installed inside the accessory bin of the 10/180 and 20/700 HP
tape libraries.
The physical characteristics are as follows:
Environmental Specifications
Choose a location that meets the following criteria:
Table 3 Physical Specifications of the Interface Manager
Height 8.48 inches (21.2 cm)
Width 17.26 inches (43.15 cm)
Depth 10.78 inches (26.95 cm)
Weight (to include box with fans,
redundant power supply, Interface
Manager controller and RMC boards and
11 slot covers)
Approximately 34.2 pounds
(15.54 kg)
Table 4 Location Criteria
Room temperature 50 o - 95 o Farenheit (10 o - 35 o C)
Humidity 20% to 80% relative humidity, non-condensing
Power source AC power voltage: 100-127 VAC/200-240VAC
50-60 Hz