HP Tape Library Interface Manager Software - Manual (Page 74)

74 Management Operations Chapter 3
FTP Interface (All Cards)- Customer Engineer (CE) Only
The Interface Manager (IM) can use FTP to update the firmware on every card
in the IM.
Upgrade Firmware Using FTP
To upgrade the firmware using FTP, do the following:
1. Connect the IM to the Ethernet network used by your computer.
2. Start your FTP program using the IM’s IP address:
ftp
Note If you do not know the IP address of the IM (or need to change
the IP address), connect to the IM using the RS-232 (serial)
connection. Current information can be seen and changed from
the Network Configuration menu.
3. Use [download] as the user name and the same password that you used
for Telnet and Web access.
Note To change the password, see Changing the Administration
Password Using Telnet on page 40
4. Specify binary mode:
Binary
5. Specify the firmware’s path and filename with the [put] command:
put /firmware/chunker
The file will transfer and the entire IM will reboot. The IM will then be using the
new firmware.
Note You may want to confirm the new firmware level by checking the
Main menu messages on the IM through the Telnet interface.