HP Compaq t5510 Thin Client - Manual (Page 279)

C-11
Host Command Summary
PROGRAMMING FUNCTION KEYS
Program Function Key(s) DCS " x D...D ST
where the data string D...D format is as follows:
Key1/Mod1/Function #/UDS/UDS Direction;
Key2/Mod2/Function #/UDS/UDS Direction;........;
Key# Is the key station number of the key to be programmed as listed below:
Esc 110 F10 121 Page Up 85
F1 112 F11 122 Page Down 86
F2 113 F12 123 Cursor Left 79
F3 114 Print Screen 124 Cursor Right 89
F4 115 Scroll Lock 125 Cursor Up 83
F5 116 Pause 126 Cursor Down 84
F6 117 Insert 75 Keypad Enter 108
F7 118 Delete 76 Return 43
F8 119 Home 80 Backspace 15
F9 120 End 81 Tab 16
/ Is a delimiter.
Mod# Is an integer that specifies the modifier key that is to be pressed at
the same time as the defined key:
0 or none Normal 5 Control
1 Normal 6 Shift+Control
2 Shift 7 Alt+Control
3 Alt 8 Alt+Control+Shift
4 Alt+Shift
Function # Is a number associated with a local function as listed below. For
example, function number "0" makes the key or key/modifier
inoperative. Function number "100" indicates a user-defined
sequence (UDS), and a UDS direction is defined following the
slash "/" delimiter.
0 No Function 91 Backspace 93 Escape
100 UDS 92 Cancel 94 Delete
UDS Is the user-defined sequence specified in Hex format. Each hex code
in this string represents a value transmitted by the defined key
combined with the modifiers.
UDS Direction Specifies the transmission direction:
0 or none Normal (Host and/or terminal) default
1 Local (Terminal only)
2 Remote (Host only)