HP Compaq t5510 Thin Client - Manual (Page 149)

8-1
HP 700-92/96 Emulation
8
HP 700-92/96 Emulation
This chapter describes features of the Hewlett Packard 700-92/96
terminal emulation.
Session Configuration
WBT Mode
This section describes the basic procedure for creating a session configuration when
the terminal is in WBT mode. The options available are described in detail in chapter
2.
1. Click the Configure tab in the Terminal Connection Manager then click the
Add button to display the New Connection dialog box.
2. Select Terminal Emulation Client and click OK. The Terminal Emulation
Client Connection Wizard - Connection Information dialog box will be
displayed.
3. Enter a name which will identify this session configuration for future selection in
the Connection Name box.
4. Select the HP 700-92/96 terminal emulation in the Emulation list box. This
emulation provides compatibility with software designed to drive the Hewlett
Packard 700/92, 2392A, 2622A, 70094 and 70096 terminals.
5. Specify the required HP Model setting: 70092 (default), 2392A, 2622A, 70094
or 70096. This identifies the particular terminal model being emulated in
response to a terminal identification request from the host.
6. Click Next to display the Host Information dialog box.
For a TCP/IP connection, click the TCP/IP button, enter the name or internet
address of the host computer in the Host Name box, then click Advanced for
additional Telnet options. Refer to the TCP/IP Connection Settings section in
chapter 2 for details.