HP Compaq t5510 Thin Client - Manual (Page 143)

7-1
DG 410/412 Emulation
7
DG 410/412 Emulation
This chapter describes the Data General D410/412 terminal emulation.
Session Configuration
WBT Mode
This section describes the basic procedure for creating a session configuration when
the terminal is in WBT mode. The options available are described in detail in chapter
2.
1. Click the Configure tab in the Terminal Connection Manager then click the
Add button to display the New Connection dialog box.
2. Select Terminal Emulation Client and click OK. The Terminal Emulation
Client Connection Wizard - Connection Information dialog box will be
displayed.
3. Enter a name which will identify this session configuration for future selection in
the Connection Name box.
4. Select the DG 410/412 terminal emulation in the Emulation list box. This
emulation provides compatibility with software designed to drive the Data
General D410/412 terminal.
5. Click Next to display the Host Information dialog box.
For a TCP/IP connection, click the TCP/IP button, enter the name or internet
address of the host computer in the Host Name box, then click Advanced for
additional Telnet options. Refer to the TCP/IP Connection Settings section in
chapter 2 for details.
For a modem connection, click the Modem button then click Advanced to
display configuration options. Refer to the Modem Connection Settings section in
chapter 2 for details.