HP Compaq t5510 Thin Client - Manual (Page 23)

2-13
Getting Started
When you achieve a TN3270E connection, the LU device name that you are
connected as will be displayed on the status line. If the specified device is rejected by
the server or host, then an error message box will be displayed indicating the reason.
Associate
This is available when the IBM 3270 Model option is set to 3287-1 (a printer). It is
used to request that the device name of the printer associated with a particular terminal
is assigned to this Telnet session. The name of the terminal is specified here. (This is
implemented as described in RFC 1647.)
TN3270E Options
TN3270E in implemented as described in RFC 1647. These options should not be
changed unless required by your System Administrator.
The Bind setting determines whether or not the server is allowed to send the SNA
Bind image and Unbind notification to the emulator.
When Responses is selected, positive and negative response handling is supported. It
allows the server to reflect to the emulator any and all definite, exception, and no
response requests sent by the host application.
When SysReq is selected, some (or all, depending on the server) of the functions of
the SysReq key will be emulated and the server in an SNA environment.
The LU1 and LU3 Printer options are available when the IBM 3270 Model option is
set to 3287-1 (a printer). They enable you to specify which printer type(s) to support.