HP Compaq t5510 Thin Client - Manual (Page 16)

2-6
Getting Started
Terminal Emulation Configuration
Emulation Options
The Emulation options in the Connection Wizard Connection Information dialog
box are as follows:
The ADDS A2 emulation provides compatibility with software designed to drive the
ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-50/50+/60 terminals.
Refer to the Wyse Emulations chapter for details.
The AIXTerm emulation provides compatibility with software designed to drive an
X terminal using X Windows.
The ANSI BBS emulation is a derivative of the ANSI device driver ANSI.SYS
supplied with all DOS based PCs and which provides the screen management for the
DOS console screen. PC based UNIX systems and Bulletin Board Systems (BBS)
often rely on the ANSI emulation when being accessed by a PC.
The AT 386 emulation provides compatibility with software designed to drive the
AT&T AT 386 terminal.
The DG 410/412 emulation provides compatibility with software designed to drive
the Data General D410 and D412 terminals. Refer to the DG 410/412 Emulation
chapter for details.
The HP 700-92/96 emulation provides compatibility with software designed to drive
the Hewlett Packard 700/92, 2392A, 2622A, 70094 and 70096 terminals. This
emulation is described in detail in the HP 700-92/96 Emulation chapter.
The HZ1500 emulation provides compatibility with software designed to drive the
Hazeltine 1500 terminal, as emulated by the Wyse WY-50/50+/60 terminals. Refer to
the Wyse Emulations chapter for details.
The IBM 3151 emulation provides compatibility with software designed to drive the
IBM 3151 terminal. Refer to the IBM 3151 Emulation chapter for information on this
emulation.
The IBM 3270 emulation provides compatibility with software designed to drive the
IBM 3270 terminal. Note that the initial display will be an ASCII text screen known
as Network Virtual Terminal mode (NVT mode for short). The setting of the IBM
3270 Model option determines the size of the display and whether or not extended
attributes are supported. Refer to the IBM 3270 Emulation chapter for details.
The IBM 5250 emulation provides compatibility with software designed to drive
IBM 5250 type alphanumeric terminals. This emulation can be used for connection to
an IBM AS/400, System/36 or System/38. Note that the initial display will be an
ASCII text screen known as Network Virtual Terminal mode (NVT mode for short).
Refer to the IBM 5250 Emulation chapter for details.
Sco Console is an emulation of the SCO UNIX box.