HP Compaq t5510 Thin Client - Manual (Page 193)

11-1
IBM 3151 Emulation
11
IBM 3151 Emulation
This chapter describes features of the IBM 3151 terminal emulation.
Introduction
The IBM 3151 emulation is based on the native mode of the IBM 3151 Model 11
terminal. The emulation is configured using the IBM 3151 Settings dialog box which
is described in the Setup Menus chapter. The display is set to 24 rows by 80 columns
by default, but you can select one of four display formats from the IBM 3151
Settings dialog box:
24 rows x 80 columns
25 rows x 80 columns
24 rows x 132 columns
25 rows x 132 columns
Session Configuration
WBT Mode
This section describes the basic procedure for creating a session configuration when
the terminal is in WBT mode. The options available are described in detail in chapter
2.
1. Click the Configure tab in the Terminal Connection Manager then click the
Add button to display the New Connection dialog box.
2. Select Terminal Emulation Client and click OK. The Terminal Emulation
Client Connection Wizard - Connection Information dialog box will be
displayed.
3. Enter a name which will identify this session configuration for future selection in
the Connection Name box.