HP Compaq t5510 Thin Client - Manual (Page 205)

13-1
Wyse Emulations
13
Wyse Emulations
This chapter describes features of the Wyse WY-50, WY-50+ and
WY-60 terminal emulations.
Session Configuration
WBT Mode
This section describes the basic procedure for creating a session configuration when
the terminal is in WBT mode. The options available are described in detail in chapter
2.
1. Click the Configure tab in the Terminal Connection Manager then click the
Add button to display the New Connection dialog box.
2. Select Terminal Emulation Client and click OK. The Terminal Emulation
Client Connection Wizard - Connection Information dialog box will be
displayed.
3. Enter a name which will identify this session configuration for future selection in
the Connection Name box.
4. Select the Wyse terminal emulation required in the Emulation list box.
The WY50, WY50+ and WY60 emulations provide compatibility with software
designed to drive the Wyse WY-50, WY-50+ and WY-60 terminals, respectively.
The ADDS A2 emulation provides compatibility with software designed to drive
the ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-50/50+/60
terminals.
The HZ 1500 emulation provides compatibility with software designed to drive
the Hazeltine 1500 terminal, as emulated by the Wyse WY-50/50+/60 terminals.
The TVI 910+, TVI 920 and TVI 925 emulations provide compatibility with
software designed to drive the TeleVideo 910+, 920 and 925 terminals, respec-
tively, as emulated by the Wyse WY-50/50+/60 terminals.