Hp rom-based setup utility, Using rbsu – HP DL380z Gen8 Virtual Workstation User Manual
Page 92
HP ROM-Based Setup Utility
RBSU is a configuration utility embedded in HP ProLiant servers that performs a wide range of
configuration activities that can include the following:
●
Configuring system devices and installed options
●
Enabling and disabling system features
●
Displaying system information
●
Selecting the primary boot controller
●
Configuring memory options
●
Language selection
For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the
Using RBSU
To use RBSU, use the following keys:
●
To access RBSU, press the
F9
key during power-up when prompted.
●
To navigate the menu system, use the arrow keys.
●
To make selections, press the
Enter
key.
●
To access Help for a highlighted configuration option, press the
F1
key.
IMPORTANT:
RBSU automatically saves settings when you press the
Enter
key. The utility
does not prompt you for confirmation of settings before you exit the utility. To change a selected
setting, you must select a different setting and press the
Enter
key.
Default configuration settings are applied to the server at one of the following times:
●
Upon the first system power-up
●
After defaults have been restored
Default configuration settings are sufficient for proper typical server operation, but configuration
settings can be modified using RBSU. The system will prompt you for access to RBSU with each
power-up.
86 Chapter 7 Software and configuration utilities