beautypg.com

Remove the air baffle – HP DL380z Gen8 Virtual Workstation User Manual

Page 34

background image

Remove the air baffle

CAUTION:

For proper cooling, do not operate the server without the access panel, baffles,

expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the

amount of time the access panel is open.
To remove the component:

1.

Power down the server on page 18

2.

Remove all power:
a.

Disconnect each power cord from the power source.

b.

Disconnect each power cord from the server.

3.

Extend (

Extend the server from the rack on page 19

) or remove the server from the rack.

4.

Remove the access panel on page 20

CAUTION:

Do not detach the cable that connects the battery pack to the cache module.

Detaching the cable causes any unsaved data in the cache module to be lost.

IMPORTANT:

It is necessary to remove the PCI riser cage only if there is a full-length

expansion board installed.

5.

Release the full-length expansion board retainer, and then remove the PCI riser cage.

28 Chapter 3 Operations