HP DL380z Gen8 Virtual Workstation - Manual (Page 77)

8. Install the TPM board. Press down on the connector to seat the board ( System board
components on page 10 ).
9. Install the TPM security rivet by pressing the rivet firmly into the system board.
10. Install the air baffle.
11. Install the PCI riser cage on page 26
12. Install the access panel on page 20
13.
Install the server into the rack ( Installing the server into the rack on page 35 ).
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server on page 18
HP Trusted Platform Module option 71