P. 77), Sensor, Recording settings – Canon RM-Software User Manual

Page 77: P. 77 and, Sensor recording settings

Record on a Regular Basis (Repeating Weekly Schedules)

ting a

Recor

ing

chedule

➅ [Advanced]

Displays the [Advanced Recording Settings] dialog

box. For details, see “Configure the Advanced

Recording Settings” (p. 82).

➆ [Use the recording-mode stream]

Enable the recording stream function. With this

function, the camera temporarily stores the image in its

own memory before sending it to the Storage Server.

This can help reduce the effects of non-uniform

network traffic (jitter).

Note

• The recording-mode stream function will only work if the

camera supports the feature and the stream can be acquired.

• If an upload function is already being used on the camera, you

cannot use the recording-mode stream function.

• This setting is only available if [JPEG] format is specified for

[Video Format].

• [Maximum Frame Rate] must be [10] or less when using this

feature.

• When the recording-mode stream function is used, the

streamed image has a higher priority than the live image.

Depending on the load on the camera, such as the number of
Viewers that are simultaneously connected to the camera,

display of the live image may stop.

• You cannot select [H.264] for the [Video Format].

• You cannot select [1280x960] for the [Resolution].

• You cannot select [MPEG-4] for the [Video Format].

• When using [Use the recording-mode stream], JPEG

images are recorded to the camera’s SD memory card

when the network connection is interrupted. The frame

rate of the recording is 1 fps. For details, see the

camera manual.

The VB-C50Fi does not support [Record audio if

available].

• You cannot select [MPEG-4] or [H.264] for the [Video

Format].

• [Use the recording-mode stream] is unavailable.

Sensor Recording Settings

➀ [Do not record]

Select to not record even when there is a signal from

this sensor.

Hint

You can individually enable or disable recording for each sensor.
For example, you may not want to record when there is door

sensor signal, but to start recording when there is a window

sensor signal.

➁ [Start Recording]

Start recording when there is a signal from the sensor.

After selecting the item, configure the recording

settings below the item.

➂ [Priority]

Select the event priority. For details, see “Check

Events” (p. 104).

➃ [Invert this event]

Start recording when there is no signal from the sensor,

and stop recording when a signal is present.

Click [Sensor Recording] in the recording mode list
and select the check box.

Configure the image and event settings.

➀

➁

➂

➃