Canon RM-Software - Manual (Page 43)

Configure a Storage Server Group
43
3
S
to
rage
S
erver
S
et
tin
g
s
„ Configure the Mail Server
➀ [SMTP Server] and [Port]
Enter an SMTP server name and change the port
number, as required.
➁ [Authentication]
Specify an SMTP server authentication method
([None], [POP before SMTP], [SMTP-AUTH]).
➂ [User Name]
If [POP before SMTP] or [SMTP-AUTH] is selected in
[Authentication], enter a user name to be used for
authentication.
➃ [Password]
Enter a password to be used for authentication with the
user name entered in
➂.
➄ [POP Server] and [Port]
If [POP before SMTP] is selected in [Authentication],
enter the name of the POP server to be used for
authentication and the port number, as required.
➅ [OK] and [Cancel]
Close the dialog box.
Note
If [POP before SMTP] is selected in [Authentication], the Storage
Server performs POP authentication before sending an e-mail
message.
„ Add an E-mail Notification Destination
➀ [To]
Enter an e-mail address as the destination.
➁ [From]
Enter the e-mail address of the sender.
➂ [Subject]
Enter the subject of the e-mail.
➃ [Min. Priority]
Specify the minimum event priority level which will
generate an e-mail notification.
➄ [OK] and [Cancel]
Close the dialog box.
The e-mail address for the specified destination and
the event priority are added to the [E-mail Notification]
list.
1 Click [Mail Server Settings] to display the [Mail Server
Settings] dialog box.
2 Configure the mail server settings.
3 Click [OK] to close the dialog box.
➀
➁
➄
➅
➂
➃
1 Click [Add] in the [Events] tab of the [Storage Server
Group Settings] dialog box to display the [E-mail
Notification Settings] dialog box.
2 Configure the e-mail notification settings.
3 Click [OK] to close the dialog box.
➀
➁
➃
➄
➂