Canon RM-Software - Manual (Page 132)

132
For setting details for the AXIS Q7404/Q7401, see the user manuals and safety precaution manuals includied with each
product.
Supported Firmware
The following firmware is necessary when using the AXIS Q7404/Q7401.
Usage Precautions
• When registering the AXIS Q7404/Q7401 in RM-64/25/9, you must enter the host name, and the Administrator group
account user name and password just as with other cameras.
• Register one AXIS Q7404/Q7401 at a time. You cannot search and register them.
• If the number of simultaneous accesses to the AXIS Q7404/Q7401 increases, it may affect the recording or live video
frame rates. Be sure to test sufficiently before beginning operation.
• A maximum of 20 clients can connect to the AXIS Q7404/Q7401. If the number of connecting clients exceeds 20, a
message stating you cannot connect to a camera will appear when you try to open an RM-64/25/9 video window.
• If the AXIS Q7404/Q7401 is not connected to a camera, or if the input signal is lost, such as an interruption of the camera
connection, [NO VIDEO] will appear on the screen of RM-64/25/9.
• Video size and image quality cannot be set with RM-64/25/9. Available video sizes are 160 x 120, 320 x 240, and
640 x 480.
• If [Aspect ratio correction] is not selected in the AXIS Q7404/Q7401’s [Image] tab of the [Video Stream Settings], the
displayed video will be slightly compressed horizontally. We recommend that you select [Aspect ratio correction].
• Reboot the AXIS Q7404/Q7401 if you use it to change settings.
Functional Limitations
The following limitations apply to the AXIS Q7404/Q7401 when using RM-64/25/9.
Recording Schedule and Recording Mode Settings
• Only continuous recording can be used.
• The following functions are disabled in the [Edit Schedule Item] dialog box.
– [Record audio if available]
– [Advanced]
– [Use the recording-mode stream]
Frame Rate
• The AXIS Q7404/Q7401 frame rate setting has no effect on the recording frame rate or live frame rate settings of RM-64/
25/9. Set the frame rate with RM-64/25/9. Only integer values for the frame rate are available in this case (minimum 1 fps).
• When four cameras are connected, you may not be able to record or play back video at the maximum frame rate
(30 fps).
Auto Adjust Frame Rate Function
Regardless of the RM-64/25/9’s setting in [Auto adjust frame rate under heavy load] in [Viewer Settings], the Auto adjust
frame rate function is always not available.
Using the AXIS Q7404/Q7401
Video Encoder Firmware
AXIS Q7404 Ver.5.20
AXIS Q7401 Ver.5.20.2