Canon RM-Software - Manual (Page 68)

68
Switch Between Layouts
The menu is separated into two sub-menus:
• Shared layouts
Displays shared layouts under the name of the Storage
Server Group. The [Layouts] menu shows the Storage
Server Groups.
All users have access to the layouts, however, only the
administrator can make changes to them.
• User layouts
Displays layouts created by the currently logged in
user. These layouts are not available to other users.
„ Configure a Layout Sequence
➀ [Sequence Name]
Enter the name of layout sequence.
➁ [Type]
Specify the type of layout sequence.
➂ [Available Layouts]
Displays a list of available layouts.
➃ [Add Layout]
Add the selected layout to the [Sequence Layouts] list.
➄ [Move Up] and [Move Down]
Move the selected layout up or down in the list to
change the sequence order.
➅ [Remove Layout]
Remove a layout from the list.
➆ [Sequence Layouts]
Displays a list of layouts in the order of the layout
sequence.
➇ [Interval]
Specify the display time of each layout in the
sequence, from 5 to 9999 seconds.
➈ [OK] and [Cancel]
Close the dialog box.
Open Multiple Layouts Using Tabs
You can open different layouts using tabs for quick
access.
A new layout is displayed for the tab.
1 Click [Layouts] on the toolbar to display a menu for
selecting existing layouts.
2 Select a layout.
1 Click [Layouts] > [New Layout Sequence] to display
the [New Layout Sequence] dialog box.
2 Specify the layouts to be displayed in the sequence.
➁
➀
➂
➈ ➅ ➃ ➆
➇
➄
3 Click [OK] to close the dialog box.
1 Click [File] > [New Tab] to open a new tab.
2 Select a layout and open it in the tab (p. 68).