Canon VB-M600VE - Manual (Page 89)

Panorama Creation Tool
6
-11
6
A
d
min T
o
ol
s
Note
• While a panorama image is being captured, the image
stabilizer function is temporarily disabled.
• While a panorama image is being created, the connection of
anyone other than Administrators is cut off.
• When a small value is entered for [Maximum Frame Rate:
Image Transmission] under [Video] > [JPEG] in the Setting
page, panorama capture is slowed down.
Saving/Deleting a Panorama Image on the
Camera
How to Save
Click [Save to camera], and then click [OK] in the
displayed dialog box.
The panorama image is saved to the camera.
How to Delete
The panorama image saved in the camera is deleted.
Saving a Panorama Image as Image Files/
Opening from Image Files
You can save a recorded panorama image as an image
file or open image files as a panorama image. Only JPEG
image files created using Panorama Creation Tool can be
handled.
How to Save
Click [Save to file] and then select the folder you want to
save the image file in and enter the file name in the
displayed dialog box.
How to Open from Image Files
Click [Load from file] and then select the image files you
want to use in the displayed dialog box.
2 When the capture is complete, click [Finish Panorama
Creation] if the image is satisfactory.
1 To delete the panorama image saved to the camera,
click [Delete] and in the dialog that appears click [OK].
The image in the panorama image display area will be
deleted.
2 Click [Save to camera], and then click [OK] in the
displayed dialog box.