Canon VB-M600VE - Manual (Page 66)

5
-22
Timer
(1) [Timer Event Setting]
Select [Disable] or [Enable] for timer event.
(2) [Start Time]
Set the start time of the timer event in 24-hour format.
(3) [Repeat Setting]
If [Enable] is selected, timer events will be generated
according to settings in (4) [Repeat Interval] and
(5) [Repeat Count].
(4) [Repeat Interval]
Select [1 sec.] [5 sec.] [10 sec.] [30 sec.] [1 min.]
[5 min.] [10 min.] [15 min.] [20 min.] [30 min.] [1 hour]
[3 hours] [6 hours] or [12 hours] for the upload and e-
mail notification repeat intervals.
(5) [Repeat Count]
Set the repeat count for uploads and e-mail
notification in the range of 1 to 65535.
(6) [Upload]
Select the upload operation to be performed. If
[Enable] is selected, upload is performed at the set
intervals. To use this function, the [General Upload]
sub-menu and the [HTTP Upload] or [FTP Upload]
sub-menu must also be set from the [Upload] menu
(p. 5-15).
(7) [E-mail Notification]
Select the e-mail notification operation to be
performed. If [Enable] is selected, e-mail notification
is performed when a timer event occurs. To use this
function, the [E-mail Notification] sub-menu must also
be set from the [Upload] menu (p. 5-17).
Sound Clip Upload
(1) [Browse File]
Specify the audio file you want to register as the
sound clip, and then click [Add].
(2) [Sound Clip Name]
Set a name for the audio file to be registered as sound
playback (up to 15 alphanumeric characters). If a
blank field is applied, the sound clip will be deleted.
To delete a registered audio file, click [Delete] next to
the sound clip name you want to delete.
Note
Audio files must be 20 seconds or shorter and must be “.wav”
files (µ-law PCM 8 bits sampling frequency 8000 Hz, monaural).
Important
[Timer Event Setting] repeats in a 24-hour cycle.
When valid times set by multiple [Timer Event Setting] overlap,
the timer event with the latest [Start Time] setting becomes
effective.
The previously performed timer event stops until its Start Time
on the next day.