Canon VB-M600VE - Manual (Page 74)

5
-30
SD Card Operations (unmount status)
(1) [Mount/Unmount]
In unmount status, [Mount] will appear. Click [Mount]
to mount the SD memory card.
Note
SD and SDHC memory cards can be used with the camera.
When an SD memory card is inserted in the card slot, it is
mounted automatically. It is also mounted automatically if
inserted in the camera at the time of booting.
For inserting and removing the SD memory card, see “Using an
SD Memory Card” in the “Installation Guide.”
(2) [Operation Settings]
Set write operations to the SD memory card to [Save
Log] or [Save Log and Images]. If [Save Log and
Images] is selected, and a network problem occurs
during upload or stream recording, images will be
saved to the SD memory card at a frame rate of 1 fps
(with image size and image quality set in [Video]
(p. 5-13)).
(3) [Format]
Click [Exec] to format the SD memory card.
Formatting erases all video and logs on the memory
card.
SD Card Operations (mount status)
(1) [Mount/Unmount]
In mount status, [Unmount] will appear. Click
[Unmount] to unmount the SD memory card.
(2) [Operation Settings]
These settings are the same as (2) [Operation
Settings] in “SD Card Operations (unmount status).”
(3) [Delete Images]
Click [Exec] to delete images from the SD memory
card. During deletion, an indicator will appear to the
right of [Exec].
Note
• It may take 10 minutes or more to delete images from the SD
memory card.
• Deleting images takes time, so it is recommended that you
stop video transmission and upload processes.
(4) [Recreate Image Management Information]
Click [Exec] to recreate the image management
information.
During re-creation, an indicator will appear to the right
of [Exec]. The SD memory card is inaccessible during
this time.
Note
• It may take 20 minutes or more to recreate image management
information.
• Recreating image management information takes time, so it is
recommended that you stop video transmission and upload
processes.
[Memory Card] SD Memory Card Operations and Settings
The following can be set here.
• SD Card Operations
Perform SD memory card operations.
• SD Card Information
Display information about the SD memory card.
Important
Be sure to perform the unmount process when turning off the
power to the camera or removing the SD memory card. Failing
to unmount first may result in management file problems or the
SD memory card becoming inaccessible.
You can use the Memory Card Unmount Tool (p. 1-4) to mount/
unmount memory cards from multiple cameras at the same
time.